All SAC Expander Mandrel kits require a 7mm ER11 Collet. Modular Sizing Dies do not come with a 7mm ER11 Collet. When purchasing a SAC Expander Mandrel Kit, you will need to add a 7mm ER11 Collet from the drop down menu if you have not previously purchased one.
The SAC Expander Mandrel Kit bridges the gap between our carbide standard and decapping expanding mandrels, by being convertible into both.
Each Mandrel kit will ship with a Thread Protector and 5 different Pins that will allow each mandrel to work with all Short Action Customs Modular Sizing Dies. Please see chart below for length fitment.
This will give you the flexibility of choice between a decapping mandrel or a standard mandrel.
Decapping pins are replaceable and can be purchased here https://ozarkprecisionnz.co.nz/shop/reloading-equipment/sac-expander-mandrel-replacement-pins/
Mandrels are made of nitrided 17-4 H1150 Steel. The pins are made of 11-44 stress proofed steel, these items are not finished and will rust over time, they are not warrantied for rust or breakage.
* 30cal and 338cal Mandrels will will need to be assembled and fed into the top cap assembly from the bottom, see photos and video for guidance.*
*.20 Cal Mandrels have their own pins, if you break one, email Info@shortactioncustoms.com for replacement purchase*
You will need either the SAC Die Wrench or a small adjustable wrench the engage the flats on the decapping pin to tighten them. https://ozarkprecisionnz.co.nz/shop/reloading-equipment/sac-die-wrench/
Contents of SAC Expander Mandrel Kit
- Modular Expander Mandrel
- Thread Protector
- Pins 1-5
- 3/16 C-Clip
- (4) .025″ Shims
ER11 Collet Compatibility
All SAC Expander Mandrel Kits require a 7mm ER 11 Collet. https://ozarkprecisionnz.co.nz/shop/reloading-equipment/sac-er-11-collets/
THIS 7MM COLLET IS NOT INCLUDED WITH THE MODULAR SIZING DIE, OR THE SAC EXPANDER MANDREL KIT.
Pin Fitment Guide
*Denotes that shims will be required*
Pin 1
- 22 ARC
- 224 Valkyrie
- 6 ARC
- Alpha Dasher
- Dasher
- BR
- BRA
- 6 PPC
- 6.5 Grendel
- 300 Blackout
- 7.62×39
Pin 2
- 204 Ruger
- 22-250 Rem
- 22-250 Rem AI
- 223 Rem
- 223 Rem AI
- *GT (4 Shims)
- 6 XC
- X47 Lapua
- Creedmoor
- 6.5 PRC
- 6.8 Western
- SAUM
- SAW
- Winchester
- *8.6 Blackout (3 Shims)
Pin 3
- 6.5×55 Swede
- 277 Fury
- 6.8×51 (277 Fury Hybrid Case)
- 7 WSM
- 284 Win
- 284 Shehane
- 300 WSM
- Winchester AI
Pin 4
- 264 Win Mag
- 270 Winchester
- 27 Nosler
- *7 PRC (3 Shims)
- 7mm Rem Mag
- *280 Rem (3 Shims)
- *280 Rem AI (3 Shims)
- 30-06 Springfield
- 300 Blaser Magnum
- 30 Nosler
- 338 Win Mag
- 338-06 AI
- 33 Nosler
Pin 5
- 26 Nosler
- 7 RUM
- 28 Nosler
- *300 PRC (3 Shims)
- 300 Win Mag
- 300 RUM
*Mandrels are not currently available in .358 Cal or .375 Cal, as they become available they will be added*
Reviews
There are no reviews yet.