Caution: firing full pressure loads on this virgin brass may shorten primer pocket life prematurely
Fire-Forming Sale
Sherman Wildcats is offering our remaining inventory of “needing to be fire formed” head stamped brass at a discount.
Blems
Blems at a savings but can hardly tell they were dropped on their heads
NEW 40* Brass
Sherman Wildcats is excited to finally be able to offer 40* shouldered brass, greatly reducing the brass prep needed. Some neck sizing may still need to be performed.
- 6,5SS (40*) = will come with a 7mm neck and will require necking down to the desired caliber
- 7SS (40*) = will come fully formed with no need to fire form or neck size
- 300SS (40*) = will come with a 7mm neck and will require necking up to the desired caliber
- 338SS (40*) = will come with a 7mm neck and will require necking up to the desired caliber
Join the 6.5 SS discussion HERE
Join the 7 SS discussion HERE
Join the 300 SS discussion HERE
Join the 338 SS discussion HERE
Reloading Data compiling HERE
Discuss in the Facebook Group: Sherman Wildcat Cartridges Group
ABOUT YOUR SHERMAN BRASS
Sherman brass is top quality brass, custom made by ADG, is derived from the SAUM parent case.
The SS brass comes properly head spaced, 7mm sized necks and with “no-turn” necks. No trimming, turning, etc. will be required. The SS series will still need final forming to your chamber so loads should be decreased by 8-10% for the initial firing.
For bore sizes other than head stamped, the bullet may need to be jammed for the initial reduced load firing.
