SHORT ACTION CUSTOMS MODUALAR FUNNEL STAND
Precision reloading methods are constantly advancing, shouldn’t your gear? How many times has your old funnel clogged up and dumped powder all over your cartridge loading block? How many times have you missed a charge weight even after thoroughly checking your loading block? Those are issues of the past, the Short Action Customs “Modular Funnel Stand” is the future of precision reloading.
When using the “Modular Funnel Stand” to hold your Short Action Custom “Modular Funnel”your hands can be free to increase efficiency and the quality of your precision reloads by following this new process.
- Grab one primed piece of rifle brass and insert it into the bottom of the funnel.
- With the other hand, dispense the charge weight into the funnel.
- Place the powder cup back on the scale and grab a bullet with the same hand.
- Remove the charged cartridge from the funnel, place a bullet on it, and set it up in your bullet seating die.
- Set the bullet, then place the fully loaded cartridge into your ammunition box.
This simple process helps eliminate missing a charge weight and is considerably faster, boosting the quality, consistency and efficiency of your loaded ammunition. Stop over-processing your brass!
Made from high quality 6061 Aluminum with Type 3 Hardcoat anodizing, the “Modular Funnel Stand” will quickly be your favorite piece of reloading gear. We machined five pockets for you to place your Short Action Customs “Modular Headspace Comparator” inserts (Sold Separately) for quick cartridge changeover. Additionally, we machined four 8/32 threaded holes for you to place case neck brushes and case prep tooling (Sold Separately) to keep everything at your fingertips. Finally, we incorporated a 3/4″ Carbon Fiber Center Rod with Dual Pivoting/Clamping Adjustment Arms to allow the reloading to precisely set up their “Modular Funnel Stand” to their liking.
- Precision machined from 6061 high strength Aluminum
- Type 3 Hard Coat Anodized for a lifetime of use
- 8″ Carbon Fiber Funnel Stand Rod for lower center of gravity
- Dual Pivoting and Clamping Adjustment Arms for personal preference
- Two mounting holes to hard mount if desired
- Short Action Customs Lifetime Warranty
- Made in the U.S.A!
The Short Action Customs modular funnel kit includes the following items
- Funnel Stand/Bullet Tray
- Carbon Fiber Tube
- Dual Pivoting and Clamping Adjustment Arms
- 3/4″ to 7/8″ pivot Pin
- Spare Nylon 1/4 x 20 set screws to lock the Carbon Fiber Tube
Not included in the kit.
- 1/8″ Allen Wrench (For Nylon Set Screw and Dual Pivoting and Clamping Adjustment Arms
- Modular Headspace Comparator Inserts
- Modular Funnel and Drop Tube
- 8/32 threaded Case Neck Prep tools
SHORT ACTION CUSTOMS MODUALAR FUNNEL STAND
Precision reloading methods are constantly advancing, shouldn’t your gear? How many times has your old funnel clogged up and dumped powder all over your cartridge loading block? How many times have you missed a charge weight even after thoroughly checking your loading block? Those are issues of the past, the Short Action Customs “Modular Funnel Stand” is the future of precision reloading.When using the “Modular Funnel Stand” to hold your Short Action Custom “Modular Funnel”your hands can be free to increase efficiency and the quality of your precision reloads by following this new process.- Grab one primed piece of rifle brass and insert it into the bottom of the funnel.
- With the other hand, dispense the charge weight into the funnel.
- Place the powder cup back on the scale and grab a bullet with the same hand.
- Remove the charged cartridge from the funnel, place a bullet on it, and set it up in your bullet seating die.
- Set the bullet, then place the fully loaded cartridge into your ammunition box.
This simple process helps eliminate missing a charge weight and is considerably faster, boosting the quality, consistency and efficiency of your loaded ammunition. Stop over-processing your brass!
Made from high quality 6061 Aluminum with Type 3 Hardcoat anodizing, the “Modular Funnel Stand” will quickly be your favorite piece of reloading gear. We machined five pockets for you to place your Short Action Customs “Modular Headspace Comparator” inserts (Sold Separately) for quick cartridge changeover. Additionally, we machined four 8/32 threaded holes for you to place case neck brushes and case prep tooling (Sold Separately) to keep everything at your fingertips. Finally, we incorporated a 3/4″ Carbon Fiber Center Rod with Dual Pivoting/Clamping Adjustment Arms to allow the reloading to precisely set up their “Modular Funnel Stand” to their liking.- Precision machined from 6061 high strength Aluminum
- Type 3 Hard Coat Anodized for a lifetime of use
- 8″ Carbon Fiber Funnel Stand Rod for lower center of gravity
- Dual Pivoting and Clamping Adjustment Arms for personal preference
- Two mounting holes to hard mount if desired
- Short Action Customs Lifetime Warranty
- Made in the U.S.A!
The Short Action Customs modular funnel kit includes the following items
- Funnel Stand/Bullet Tray
- Carbon Fiber Tube
- Dual Pivoting and Clamping Adjustment Arms
- 3/4″ to 7/8″ pivot Pin
- Spare Nylon 1/4 x 20 set screws to lock the Carbon Fiber Tube
Not included in the kit.
- 1/8″ Allen Wrench (For Nylon Set Screw and Dual Pivoting and Clamping Adjustment Arms
- Modular Headspace Comparator Inserts
- Modular Funnel and Drop Tube
- 8/32 threaded Case Neck Prep tools
