The AF100 is built to bring consistency and control to the powder-charging stage of precision ammunition loading. By automating the process of dispensing powder and staging cases, the AF100 allows reloaders to load up to 100 cases at a time, each charged and staged with a bullet ready for seating.
Instead of repeating the same manual steps, the AF100 creates a structured workflow that helps ensure every round is loaded the same way. The result is a cleaner loading process, improved consistency, and better focus on the final stages of cartridge assembly.
Ideal for precision shooters and serious reloaders who value repeatability and process control at the loading bench.
Gray Ops AF100 (Buyer Supplies Scale / Trickler)
- This purchase option will only include the AF100 Automation and 1 x Standard (.473) 100rd Reloading Block.
- The customer is responsible for providing the following compatible Scale / Trickler Options:
- AD FX120i
- AD FX123i
- AD FX300
- Autotrickler V3 Variants
- Autotrickler V4 Variants
- Ingenuity Precision Powder System
Gray Ops AF100 (Complete System)
- This purchase option will include the following:
- AF100 Automation
- AD FX123i Scale
- Ingenuity for AF100 Powder Dispensing System (Only Available for sale with AF100)
- 1 x Standard (.473) 100rd Reloading Block
This Product will be exclusively distributed through Gray Ops CNC in the United States.
Compatible Scales:
- A&D FX 120
- A&D FX 123
- A&D FX 300
Scale Compatibility Notice
These are the scales around which the system was designed, developed, and tested. Other scales may be compatible; however, they have not yet been tested or approved for use with the system.
At this time, the use of any scale not specifically listed as compatible is not recommended. Gray Ops CNC and Controlled Molding Inc. are not responsible for compatibility issues, performance problems, damage, or other issues resulting from the use of untested or non-approved scales.
As additional scales are tested and verified for compatibility, they will be added to the Approved Scale List.
Compatible Powder Throwers / Tricklers:
- Autotrickler V3 w/ Autotricker Trickler
- Autotrickler V3 w/ Ingenuity Trickler and Side Stand
- Autotrickler V3 w/ Ingenuity Trickler / Powder Drop dual housing
- Autotrickler V4
- Autotrickler V4 w/ Ingenuity Trickler and Side Stand
- Ingenuity Powder System
Disclaimer: These are the only compatible units. If additional units are added to this list we will notify via email.
Ammo Block Options:
The AF100 has 7 reloading block caliber options for your reloading needs. Each caliber option is available in a either a 50 round or 100 round block. Only ONE (.473) 100 round block is included in the kit. Additional Blocks can be purchased.
Caliber / Dimensions
- 223 / 5.56 Block – Bolt Face: 0.378
- 6 ARC Block – Bolt Face 0.441
- Standard Block – Bolt Face 0.473
- 284 Norma Block – Bolt Face 0.473
- PRC Magnum Block – Bolt Face 0.540
- WSM / SAUM Magnum Block – Bolt Face 0.555
- Lapua Block – Bolt Face 0.588
Bullet Feeder:
The AF100 comes with a bullet feeder included. Each unit will ship with 4 Bullet Feeder Plates and 1 interchangeable clutch. It is recommended that only boat tail style bullets are used in the bullet feeder. (This option can not be removed)
- Calibers
- .223 / .243
- .243 / .264
- .284 / .308
- .308 / .338
Drop Tubes:
The AF100 comes with a powder drop tube and bullet drop tube for the calibers listed below.
- Calibers:
- .223
- .243
- .264
- .284
- .308
- .338
Disclaimers:
- This system will not work with any centerfire case with a case mouth diameter greater than 0.338″
- Flat Based Bullets are not recommended for use in the bullet dropper, only use boat tail bullets.
Click on the link for the desired manual:
Video Based Instructions available on the video tab.
SOFTWARE UPDATES:
- No Updates at this time
AF100 Limited Warranty
Controlled Molding Inc. (CMI) warrants the AF100 against defects in materials and workmanship for one (1) year from the date of shipment or 10,000 rounds on the machine’s lifetime round counter, whichever occurs first.
This warranty applies only when the AF100 is operated and maintained in accordance with the manufacturer’s instructions.
Warranty Exclusions
The warranty will be void if:
- The AF100 is exposed to water or other liquids.
- The ribbon cable is connected or disconnected while the machine is powered on.
- The machine is abused, misused, improperly maintained, altered, or modified.
- Non-approved or non-OEM components are installed or used in contact with, or in conjunction with, the AF100 loading system.
To maintain warranty coverage, only OEM or specifically approved components and accessories may be used with the AF100. Examples of non-approved components include, but are not limited to:
- Scale support plates or weighing pans not sourced from A&D
- Loading blocks other than those offered or approved by Gray Ops CNC
- Aftermarket components that interface with or affect the operation of the AF100 loading system
Use of non-OEM or non-approved components may affect the operation, accuracy, reliability, or safety of the AF100 and will void the manufacturer’s warranty.
Warranty claims are subject to inspection and approval by Controlled Molding Inc. (CMI).
Units Located Outside the United States
For any AF100 that has been transported, transferred, or otherwise taken outside of the United States, the customer is responsible for all shipping, transportation, customs, duties, taxes, brokerage fees, import/export fees, and other costs associated with obtaining warranty service or returning the unit to the United States.
CMI and Gray Ops CNC are not responsible for these costs.
Warranty claims are subject to inspection and approval by Controlled Molding Inc. (CMI).
AF100 Return & Refund Policy
We want every AF100 customer to be satisfied with their purchase. Due to the specialized nature of the AF100, the following return and refund policy applies to all AF100 purchases.
30-Day Return Period
AF100 returns are accepted within 30 calendar days of the confirmed delivery date. Return requests received after 30 days will not be accepted.
All returns require prior authorization from Gray Ops CNC. Products returned without authorization may be refused and returned to the customer.
Return Condition
To be eligible for return, the AF100 must be returned in good condition and include all original components, accessories, cables, hardware, manuals, and other items supplied with the system.
Whenever possible, the AF100 should be returned in its original packaging and protective materials. The customer is responsible for packaging the unit adequately to prevent damage during return shipment.
Gray Ops CNC reserves the right to refuse a return or deduct additional charges from the refund if the unit is returned damaged, modified, abused, incomplete, or missing components or accessories.
15% Restocking Fee
All AF100 returns are subject to a mandatory 15% restocking fee. The restocking fee applies to all accepted returns and will be deducted from the customer’s refund.
Original shipping charges, expedited shipping charges, and other shipping-related fees are non-refundable.
Return Shipping
The customer is responsible for all return shipping costs.
The customer is also responsible for the AF100 until it is received by Gray Ops CNC. We strongly recommend using a trackable shipping service with adequate insurance and signature confirmation.
Gray Ops CNC is not responsible for returned products that are lost or damaged in transit.
Inspection & Refund
All returned AF100 units will be inspected upon receipt.
Once the return has been received, inspected, and approved, the refund will be issued to the original payment method, less the 15% restocking fee, original shipping charges, and any applicable deductions for missing components or damage.
Please allow a reasonable processing period after the unit is received for inspection and issuance of the refund.
Defective or Warranty Issues
Returns are separate from warranty claims. If you are experiencing a problem with your AF100, please contact Gray Ops CNC before initiating a return.
Products believed to be defective may be subject to troubleshooting, inspection, repair, or replacement under the applicable AF100 Limited Warranty rather than this return policy.
Return Authorization
To request an AF100 return, contact Gray Ops CNC within 30 days of delivery and provide your order number, customer name, and reason for the return.
Return shipping instructions will be provided after the return has been authorized.
By purchasing the AF100, the customer acknowledges and agrees to this Return & Refund Policy.
