ADG Brass – 7-6.5 PRCW (Precision Rifle Cartridge – Wheeler Improved)

ADG 7-6.5 PRCW (Precision Rifle Cartridge) brass was designed in collaboration with Alex Wheeler specifically to create a 7mm cartridge using ADG’s proven 6.5 PRC cartridge case specifically for ELR shooting.  This cartridge has the same body dimensions and processing as our 6.5 PRC cartridge case and was tooled to form a 7mm neck.  As such, the neck thickness will be slightly thinner than the original 6.5 PRC cartridge or any fire-formed brass that you may have.  Our average neck thickness for the 7-6.5 PRCW cartridge is 0.0135″ as compared to 0.0149″ for our 6.5 PRC cartridge.  The average loaded neck diameter of 7-65 PRCW is 0.3120″.  Chamber reamers are available from JGS Precision .  You can order the chamber reamers directly from JGS with the following part numbers:

JGS Precision / sales@jgstools.com / 541-267-4331

Chamber Reamer Link:  7-65PRCW

For the best performance and life from your ADG brass, we recommend using our optimized chamber design in conjunction with specifically designed ADG Fat-Boy Series full-length resizing dies.  For those who want next-level performance, we would also recommend annealing between loadings.  Annealing is not required to get ADG brass to perform better than our competitors, but if you are planning on setting world records, becoming a world champion, or stretching the legs on a hunt, absolute consistency is achieved when annealing the case mouth between firings using our ARC Ultimate Annealer!

We recommend using a reputable load data source and working up from their recommended minimum starting loads.  Failure to reduce charge weights established using other manufacturers brass may result in higher pressures and velocities while using ADG brass and may result in unsafe pressure levels.